How to design tape-and-reel packaging for SMD copper bars: nozzle pickup, tape orientation, and SMT production poka-yoke
Whether an SMD copper bar can enter stable SMT production depends not only on current-carrying capacity, but also on car...
Stay up to date with our latest news, technical guides, and case studies
Whether an SMD copper bar can enter stable SMT production depends not only on current-carrying capacity, but also on car...
When SMT nuts float, tilt, show weak solder joints, or lose torque stability after reflow, the root cause is rarely the ...
High-current PCB via-array heating is rarely caused only by having too few vias. It is usually the combined result of pa...
Welding-terminal plating is not simply a matter of choosing the most expensive finish. Tin, nickel, and silver plating s...
When a PCB welding terminal overheats, turns black, loosens, or discolors the board edge, the root cause is rarely one p...
AI servers and GPU power architectures are pushing 48V board-level power delivery into higher power density. A 48V bus c...
When a high-current PCB starts depending on 2oz or 3oz copper, wider traces, or parallel layers, cost, process window, a...
AI servers and GPU racks are pushing data center power design from ordinary distribution into high-density, high-current...
Welding-terminal selection is not only about thread size. Behind common options such as M4, M5, and M6, the real decisio...
In high-current design, a busbar cross section should not be scaled only from the current number. For 100A and 200A appl...
There is more than one way to build a high-current PCB connection. SMD copper bars are better for board-level current sh...
Reliable SMD copper bar performance depends not only on the metal part itself, but also on pad area, solder paste openin...